316L/304/316/321 Stainless Steel Coil Tubing for Heat Exchanger

Basic Info

Model NO.	316L/304/316/321
Outside Diameter	4mm to 720mm
Thickness	0.5mm-68mm
THK	Sch10s,Sch20s,Sch40s,Sch80s,Sch160s,Std,Xs,Xxs
Od	1/8" to 38"
Length	as Requirement
Surface	Satin(400g),Hairline(400g),Mirror(800g),Polished
Standard	ASTM/ASME A312/A213/A269/A789/A511/A376/B829 Ect.
Tolerance	as Per Standard
Transport Package	as Customer′s Requirement
Trademark	ZYTC
Origin	Tianjin, China
HS Code	7306400
Production Capacity	500 Tons/Month

Product Description

Alloy 304 is a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304 hasa maximum carbon of 0.07% . It is the standard "18/8 stainless" that is commonly found in pans and cooking tools. Alloy304 is the most versatile and widely used alloy in the stainless steel family. Ideal for a wide variety of home and commercialapplications, Alloy 304 exhibits excellent corrosion resistance and has a high ease of fabrication, outstanding formability.The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded byall fusion and resistance welding processes.Corrosion Resistance:★Resistance to moderately aggressive organic acids is a result of the 9 to 11% nickel that the 304 alloys contain.★Resistance to corrosion in oxidizing environments is a result of the 18 to 19% chromium that the 304 alloys contain.★The 304, 304L and 304H may be considered to perform uniformly in most corrosive environments.Heat Resistance:★Continuous use of 304 in the 800-1580°F range is not recommended if subsequent aqueous corrosion resistance is important.Machinability:★The use of chip breakers is advised since the chips can be stringy. Stainless steel works harden rapidly, heavy positivefeeds, sharp tooling, and a rigid set-up should be used. of cut below the work-hardened layer resulting from the previous passes.★Good oxidation resistance in intermittent service to 1600°F and in continuous service to 1690°F.Standards:ASTM/ASME: UNS S30400 / S30403EURONORM: 1.4301 / 1.4303AFNOR: Z5 CN 18.09 / Z2 CN 18.10DIN: X5 CrNi 18 10 / X2 CrNi 19 11

304/304H Chemical Composition:Weight % (all values are maximum unless a range is otherwise indicated)

Element	304	304H
Cr	18.0 - 20.0	18.0 - 20.0
Ni	8.0 - 10	8.0 - 10
C	0.08	0.04 - 0.1
Mn	2.0	2.0
P	0.045	0.045
S	0.03	0.03
Si	0.75	0.75
N	0.1	0.1
Fe	Balance	Balance

304/304H Mechanical Properties:

	Typical	304	304H
0.2% Offset Yield Strength, ksi	43	30 min	30 min
Ultimate Tensile Strength, ksi	91	75 min	75 min
Elongation in 2 inches, %	58	40 min	40 min
Reduction in Area, %	68	--	-
Hardness, Rockwell B	83	92 max	92 max

304/304H Stainless Steel Applications:

• Kitchen benches, sinks, troughs, equipment, and appliances
• Chemical containers, including for transport
• Food processing equipment, particularly in beer brewing, milk processing, and winemaking
• Heat exchangers
• Architectural trim and molding
• Woven or welded screens for mining, quarrying & water filtration
• Automotive and aerospace structural use
• Nuts, bolts, screws, and other fasteners in the marine environment
• Construction material in large buildings
• Dyeing industry

Stainless Steel Seamless Pipe/Stainless Steel Seamless Tube

 

* Outside Diameter: 4.0mm - 1219.0mm
* Wall Thickness: 0.5mm - 100.0mm
* Length: up to 24m
* Tolerance: According to the standard
* Technique: Hot rolled/Cold drawn/Forged
* Surface: Pickling, Polished, Grit blast, 180#, 320#, 400#, Bright Anneal,400#, 500#, 600#
* Standard: ASTM A312. ASME SA269, ASTM A269, ASME SA213, ASTM A215, ASTM A511, ASTM A789, ASTM A790, ASTM A 268, DIN 2462.1, DIN 17456, DIN 17458, JIS G3463, JIS G3459, GOST 9941, etc.
*Grade: 201, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 430, 430Ti, 409L, 439, 440C, 446, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Punching, Cutting, etc.
* Pipe End: BE/PE with cap
PLEASE CONTACT THE SALES TEAM FOR THE DETAILED STOCK LIST Stainless Steel Welded Pipe/Stainless Steel Welded Tube

* Classification: Stainless steel industry pipe, stainless steel decorative tube
* Outside Diameter: 4.0mm - 1219.0mm
* Wall Thickness: 0.5mm - 20.0mm
* Length: Normally 6.0m, or as requirements
* Tolerance: According to the standard
* Technique: Hot rolled/Cold drawn
* Surface: Pickling, Polished, 180#, 320#, 400#, Bright Anneal,400#, 500#, 600#
* Standard: ASTM A312, ASTM A358, ASTM A249, ASTM A269, ASTM A554, ASTM A790, DIN 17457, JIS 3459, etc
*Grade: 201, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 430, 430Ti, 409L, 439, 440C, 446, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Punching, Cutting, etc.

PLEASE CONTACT THE SALES TEAM FOR THE DETAILED STOCK LISTStainless Steel Capillary Pipe/Stainless Steel Capillary Tube

 

* Outside Diameter: 0.4mm - 16.0mm
* Wall Thickness: 0.1mm - 2.0mm
* Length: Up to 18000mm, or cut into small pieces
* Tolerance: According to the standard
* Technique: (High Precision) Cold drawn
* Surface: Inside and Outside Bright Annealed
* Standard: ASTM A312, ASTM A358, ASTM A249, ASTM A269, ASTM A554, ASTM A790, DIN 17457, JIS 3459, etc
*Grade: 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, S32760, 2205, 904L, 630, 631,etc

PLEASE CONTACT THE SALES TEAM FOR THE DETAILED STOCK LIST Stainless Steel Sanitary Pipe/Stainless Steel Sanitary Tube

* Classification: Stainless steel welded sanitary pipe, stainless steel seamless sanitary tube
* Outside Diameter: 6.0mm - 850.0mm
* Wall Thickness: 0.5mm - 6.0mm
* Length: Up to 18000mm, or cut into small pieces
* Tolerance: According to the standard
* Technique: Cold drawn
* Surface: Inside OR Outside Polished
* Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213, ASTM A511, ASTM A789, ASTM A790, ASTM A376, ASME SA335, SB161, SB163, SB338, SB667, DIN 2462, DIN 17456, DIN 17458, EN 10216, JIS 3463, JIS G3459, GOST 9941, etc
*Grade: 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, S32760, 2205, 904L, 630, 631,etc

PLEASE CONTACT THE SALES TEAM FOR THE DETAILED STOCK LIST Stainless Steel Square Pipe/Stainless Steel Square Tube

* Classification: Stainless steel welded square pipe, stainless steel seamless square tube
* Side Length: 4.0*4.0mm - 300.0*300.0mm
* Wall Thickness: 0.25mm - 8.0mm
* Length: Normally 6.0m, or cut into small pieces
* Tolerance: According to the standard
* Technique: Cold drawn/Hot Rolled
* Surface: Hairline, Polished, 180#, 320#, 400#, Bright Anneal,400#, 500#, 600#
* Standard: ASTM A312, ASTM A358, ASTM A249, ASTM A269, ASTM A554, ASTM A790, DIN 17457, JIS G3459, etc
*Grade: 201, 304, 304L, 316, 316L, 321, 317L, etc

PLEASE CONTACT THE SALES TEAM FOR THE DETAILED STOCK LISTStainless Steel Rectangular Pipe/Stainless Steel Rectangular Tube

* Classification: Stainless steel welded rectangular pipe, stainless steel seamless rectangular tube
* Side Length: 4.0*6.0mm - 200.0*400.0mm
* Wall Thickness: 0.25mm - 8.0mm
* Length: Normally 6.0m, or cut into small pieces
* Tolerance: According to the standard
* Technique: Cold drawn/Hot Rolled
* Surface: Hairline, Polished, 180#, 320#, 400#, Bright Anneal,400#, 500#, 600#
* Standard: ASTM A312, ASTM A358, ASTM A249, ASTM A269, ASTM A554, ASTM A790, DIN 17457, JIS G3459, etc
*Grade: 201, 304, 304L, 316, 316L, 321, 317L, etc

PLEASE CONTACT THE SALES TEAM FOR THE DETAILED STOCK LISTStainless Steel Coil Pipe/Stainless Steel Coil Tube

* Classification: O Type, I Type, W Type, U Type
* Outside Diameter: 6.0 mm - 32.0mm
* Wall Thickness: 0.1mm - 3.0mm
* Length: 150m, 1500m, 1800m, or as requirements
* Tolerance: According to the standard
* Technique: Cold drawn/Hot Rolled
* Surface: Pickling, Polished, 180#, 320#, 400#, Bright Anneal,400#, 500#, 600#
* Standard: ASTM A269, A249, JIS G 43-5, EN 10216
*Grade: 201, 304, 304L, 316, 316L, 904L, S32205, S31803, etc

PLEASE CONTACT THE SALES TEAM FOR THE DETAILED STOCK LIST

Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products
Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate
Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality
Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, etc
Q: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton
Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation
Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings
Q: How to guarantee the quality?
A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export
Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again
Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order
Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.